combined-sysname disable

Function

The combined-sysname disable command disables the command line prompt of VSn from carrying the system name of Admin-VS.

The undo combined-sysname disable command enables the command line prompt of VSn to carry the system name of Admin-VS.

By default, the command line prompt of VSn carries the system name of Admin-VS.

Format

combined-sysname disable

undo combined-sysname disable

Parameters

None

Views

Management view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
lsvs	write

Usage Guidelines

Usage Scenario

By default, if you run the switch virtual-system command to switch from an admin VS to a service VS, the command line prompt of the service VS consists of the system names of both the admin and service VSs. When you switch from Admin-VS to VSn, if the system name configured for the admin or service VS is too long, the command line prompt of the service VS is also long. In this case, you can run the combined-sysname disable command to disable the command line prompt of the service VS from carrying the system name of the admin VS, simplifying the command line prompt of the service VS.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the command line prompt of VSn from carrying the system name of Admin-VS.

<HUAWEI> system-view
[~HUAWEI] admin
[*HUAWEI-admin] combined-sysname disable