description (VS view)

Function

The description command creates or changes the description of a virtual system (VS).

The undo description command deletes the description of a VS.

A VS does not have a description by default.

Format

description description

undo description

Parameters

Parameter	Description	Value
description	Specifies the description of a VS.	The value is a string of 1 to 242 characters, with spaces supported. The description describes the usage of a VS and the service carried by the VS. If this command is not used, the VS does not have a description.

Parameter

Description

Value

description

Specifies the description of a VS.

The value is a string of 1 to 242 characters, with spaces supported. The description describes the usage of a VS and the service carried by the VS. If this command is not used, the VS does not have a description.

Views

VS view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
lsvs	write

Usage Guidelines

Usage Scenario

VSs are able to carry various types of services. To help users grasp information about a VS, the network administrator can configure a description for the VS to describe the service type or usage. To configure a VS description, run the description command.

Precautions

Before you create or change the description of a VS, ensure that the VS has been established.

Example

# Configure the description for a VS.

<HUAWEI> system-view
[~HUAWEI] admin
[*HUAWEI-admin] virtual-system vs1
[*HUAWEI-admin-vs:vs1] port-mode port
[*HUAWEI-admin-vs:vs1] description ospf