eth-tag

Function

The eth-tag command adds an Ethernet tag value to an Ethernet tag list.

The undo eth-tag command deletes an Ethernet tag value from an Ethernet tag list.

By default, no Ethernet tag value is added to an Ethernet tag list.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

eth-tag ethTagValue

undo eth-tag ethTagValue

Parameters

Parameter	Description	Value
ethTagValue	Specifies an Ethernet tag value.	The value is an integer ranging from 0 to 4294967295.

Parameter

Description

Value

ethTagValue

Specifies an Ethernet tag value.

The value is an integer ranging from 0 to 4294967295.

Views

Eth-Tag list view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

On an EVPN, an Ethernet tag list can be applied to an if-match clause to control route advertisement and receiving. To add an Ethernet tag value to an Ethernet tag list, run the eth-tag command.

Example

# Add the Ethernet tag value 10 to an Ethernet tag list.

<HUAWEI> system-view
[~HUAWEI] filter-list eth-tag ethtag
[*HUAWEI-eth-tag-list-ethtag] eth-tag 10