display route-policy

Function

The display route-policy command displays the configured route-policy.

Format

display route-policy [ route-policy-name ]

Parameters

Parameter	Description	Value
route-policy-name	Specifies the name of the route-policy to be displayed.	The name is a string of 1 to 200 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value must be unique.

Parameter

Description

Value

route-policy-name

Specifies the name of the route-policy to be displayed.

The name is a string of 1 to 200 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

The value must be unique.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
route-base	read

Usage Guidelines

Usage Scenario

To view detailed information about the configured route-policy, run the display route-policy command.

Configuration Impact

If the route-policy name is not specified, the display route-policy command displays detailed information about all configured route-policies.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the route-policy named policy1.

<HUAWEI> display route-policy policy1
Route-policy : policy1
permit : 10 (matched counts: 0)
Match clauses :
if-match acl 2000
Apply clauses :
apply cost 100
apply tag 100

**Table 1** Description of the **display route-policy** command output
Item	Description
Route-policy	Name of the route-policy.
permit	Matching mode and node index of the route-policy.
Match clauses	List of if-match clauses.
Apply clauses	Apply clause list.
matched counts	Match count of route policy node.