display mpls te gmpls tunnel

Function

The display mpls te gmpls tunnel command displays information about a specific or all GMPLS UNI tunnels on a device.

Format

display mpls te gmpls tunnel [ name gmpls-tunnel-name ] [ verbose ]

display mpls te gmpls tunnel ingress-lsr-id ingress-lsr-id egress-lsr-id egress-lsr-id session-id session-id lsp-id lsp-id

Parameters

Parameter	Description	Value
name gmpls-tunnel-name	Displays information about a GMPLS UNI tunnel with a specified name.	The value is a string of 1 to 63 case-sensitive characters, spaces not supported.
verbose	Displays detailed information.	-
ingress-lsr-id ingress-lsr-id	Specifies the ingress LSR ID.	The value is in dotted decimal notation.
egress-lsr-id egress-lsr-id	Specifies the egress LSR ID.	The value is in dotted decimal notation.
session-id session-id	Specifies the session ID.	The value is an integer ranging from 0 to 65535.
lsp-id lsp-id	Specifies the local LSP ID.	The value is an integer ranging from 0 to 65535.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
gmpls-te	read

Usage Guidelines

Usage Scenario

To view information about a specific or all GMPLS UNI tunnels on a device, run the display mpls te gmpls tunnel slave command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about a GMPLS UNI tunnel.

<HUAWEI> display mpls te gmpls tunnel verbose
    Tunnel-Name         :  toD
    Session ID          :  1               LSP ID        :  13
    Ingress LSR ID      :  1.1.1.1         Egress LSR ID :  2.2.2.2
    LSR Role            :  Ingress         Resv Style    :  SE
    Bandwidth(Kbit/sec) :  1000            Interface ID  :  -
    Incoming Interface  :  Te-Link1
    Outgoing Interface  :  Te-Link1
    Phop Address        :  -               Nhop Address  :  2.2.2.2
    In Label            :  1               Out Label     :  1
    Created Time        :  2014-07-24 01:16:13

# Display information about GMPLS UNI tunnels.

<HUAWEI> display mpls te gmpls tunnel
-------------------------------------------------------------------------------
Ingress LsrId   Destination     LSPID In/Out Label     R Tunnel-name
-------------------------------------------------------------------------------
1.1.1.1         2.2.2.2         13    1/1             I toD
-------------------------------------------------------------------------------
R: Role, I: Ingress, T: Transit, E: Egress

**Table 1** Description of the **display mpls te gmpls tunnel** command output
Item	Description
Tunnel-Name	Tunnel name.
Session ID	Tunnel ID.
LSP ID	LSP ID.
Ingress LsrId	Ingress LSR ID.
Ingress LSR ID	Ingress LSR ID.
LSR Role	LSR role: Ingress. Egress. Transit.
Egress LSR ID	Egress LSR ID.
Resv Style	Resources reservation style: SE: shared explicit style, allowing LSPs passing through one link to share a resource reservation.
Bandwidth(Kbit/sec)	Bandwidth, in Kbit/sec.
Interface ID	Interface ID.
Incoming Interface	Name of an inbound interface of an LSP on the local node.
Outgoing Interface	Name of an outbound interface of an LSP on the local node.
Phop Address	Previous hop address.
Nhop Address	Next hop address.
In Label	Incoming label value.
Out Label	Outgoing label value.
Created Time	Date and time when a tunnel was established.
Destination	Destination IP address of a tunnel.
LSPID	LDP ID.
In/Out Label	Incoming and outgoing label values.
R	Role of a node on an LSP: I: ingress. T: transit. E: egress.
Tunnel-name	Tunnel name.