display mpls te gmpls tunnel c-hop
Function
The display mpls te gmpls tunnel c-hop command displays information about the path calculated for a GMPLS UNI tunnel.
Parameters
| Parameter | Description | Value |
|---|---|---|
| tunnel-name name |
Displays information about a path calculated for a GMPLS UNI tunnel with a specified name. |
The value is a string of 1 to 255 case-sensitive characters. It cannot contain spaces. |
| lsp-id |
Displays information about a path calculated for a GMPLS UNI tunnel with a specified name. |
- |
| ingress-lsr-id |
Specifies the LSR ID of the ingress from which a GMPLS UNI tunnel originates. |
The value is in dotted decimal notation. |
| egress-lsr-id |
Specifies the LSR ID of the egress from which a GMPLS UNI tunnel originates. |
The value is in dotted decimal notation. |
| session-id |
Specifies a tunnel ID. |
The value is an integer ranging from 0 to 65535. |
| local-lsp-id |
Specifies a local LSR ID. |
The value is an integer ranging from 0 to 65535. |
Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display mpls te gmpls tunnel c-hop
Tunnel Interface Name : beijing
Lsp ID : 10.1.1.1 :33:2
CHop Information:
Hop 0 10.22.0.1
Hop 1 10.22.0.2
Hop 2 PathKey: 4294967295 PCE-ID: 255.255.255.255
Hop 3 10.2.22.1
Hop 4 10.2.22.1
| Item | Description |
|---|---|
| Tunnel Interface Name | Tunnel name of a GMPLS UNI tunnel. |
| Lsp ID | ID of LSP. |
| CHop Information | Information about the path calculated for a GMPLS UNI tunnel. |
| PathKey | Key value of a path. |
| PCE-ID | PCE identifier. |