delay

Function

The delay command sets a delay for a Flex-Algo link.

The undo delay command cancels the setting.

By default, no delay attribute is configured for a Flex-Algo link.

Format

delay delay-value

undo delay

undo delay delay-value

Parameters

Parameter	Description	Value
delay-value	Delay, in microseconds.	The value is an integer ranging from 1 to 16777215.

Parameter

Description

Value

delay-value

Delay, in microseconds.

The value is an integer ranging from 1 to 16777215.

Views

Link attribute application view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

To set a delay for a Flex-Algo link, run the delay command in the Flex-Algo link attribute application view.

Example

# Set the delay to 20 in the Flex-Algo link attribute application view.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
Warning: This operation will switch all TE common attributes configurations to TE mode. Continue? [Y/N]:Y
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] te link-attribute-application flex-algo
[*HUAWEI-GigabitEthernet0/1/0-te-link-attribute-application] delay 20