info-center log-severity

Function

The info-center log-severity command sets the severity of log messages.

The undo info-center log-severity command restores the default severity of log messages.

By default, the log buffer records log messages of levels 0 through 4.

info-center log-severity bymodule-alias module-name logname severity log-level

undo info-center log-severity bymodule-alias module-name logname severity

Parameter	Description	Value
logname	Specifies a log name.	The value is a string of 1 to 63 case-insensitive characters, spaces not supported.
severity log-level	Specifies the severity string of log messages.	The value is of the enumerated type. emergencies: mapped to 0. An error of the urgency level occurs. alert: mapped to 1. An error needs to be corrected immediately. critical: mapped to 2. A serious error occurs. error: mapped to 3. An error occurs. warning: mapped to 4. An error may occur. notification: mapped to 5. An event to be noticed occurs. informational mapped to 6. An event occurs, and no action is required. debugging: mapped to 7. Debugging information is displayed.
bymodule-alias module-name	Specifies the name of a module that generates log messages.	The value is a string of 1 to 63 case-insensitive characters, spaces not supported.

Parameter

Description

Value

logname

Specifies a log name.

The value is a string of 1 to 63 case-insensitive characters, spaces not supported.

severity log-level

Specifies the severity string of log messages.

The value is of the enumerated type.

bymodule-alias module-name

Specifies the name of a module that generates log messages.

The value is a string of 1 to 63 case-insensitive characters, spaces not supported.

System view

3: Management level

Task Name	Operations
log	write

Usage Scenario

The log buffer records log messages of levels 0 through 4 by default. You can run the

info-center log-severity command to set the log severity as needed:

Set the severity of log messages to a value ranging 5 through 7 so that the log buffer does not record these log messages.
Set the severity of log messages to a value ranging 0 through 4 so that the log buffer records these log messages.

# Set the severity of CLI operation logs to error.

<HUAWEI> system-view
[~HUAWEI] info-center log-severity bymodule-alias cli cmdrecord severity error