info-center logbuffer

Function

The info-center logbuffer size command sets the number of logs to be displayed.

The undo info-center logbuffer size command restores the default number of logs to be displayed.

The info-center logbuffer command enables the log buffer.

The undo info-center logbuffer command disables the log buffer.

By default, info-center logbuffer is enabled and a maximum of 512 logs are displayed.

info-center logbuffer size buffersize

info-center logbuffer

undo info-center logbuffer size

undo info-center logbuffer

Parameter	Description	Value
size buffersize	Specifies the number of logs to be displayed.	The value is an integer ranging from 0 to 10240. If buffersize is set to 0, no log will be displayed.

Parameter

Description

Value

size buffersize

Specifies the number of logs to be displayed.

The value is an integer ranging from 0 to 10240.

If buffersize is set to 0, no log will be displayed.

System view

3: Management level

Task Name	Operations
log	write

Usage Scenario

You can run the info-center logbuffer command to enable the log buffer so that the device starts to record logs.
You can run the info-center logbuffer size command to set the number of logs to be displayed at a time.

Configuration Impact

If you run the info-center logbuffer size command multiple times, only the latest configuration takes effect.

# Set the number of logs to be displayed to 50.

<HUAWEI> system-view
[~HUAWEI] info-center logbuffer size 50