mpls te p2mp-te

Function

The mpls te p2mp-te command enables P2MP MPLS TE.

The undo mpls te p2mp-te command disables P2MP MPLS TE.

By default, P2MP MPLS TE is disabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

mpls te p2mp-te

undo mpls te p2mp-te

Parameters

None

Views

MPLS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

To enable P2MP MPLS TE globally, run the mpls te p2mp-te command in the MPLS view. Run the mpls te p2mp-te command to enable P2MP MPLS TE before you run the mpls te p2mp-mode command to set the MPLS TE tunnel type to P2MP.

Precautions

If the undo mpls te p2mp-te command is run, all P2MP TE LSPs established on the node are torn down.

Example

# Enable P2MP MPLS TE globally.

<HUAWEI> system-view
[~HUAWEI] mpls lsr-id 1.1.1.9
[*HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls te p2mp-te