mpls-oam

Function

The mpls-oam command displays the MPLS-OAM view.

The undo mpls-oam command deletes the MPLS-OAM view and MPLS OAM configurations.

By default, no MPLS-OAM view is created.

mpls-oam

undo mpls-oam

None

System view

2: Configuration level

Task Name	Operations
tpoam	write

Usage Scenario

The mpls-oam command must be run before MPLS OAM is configured for monitoring service links.

You can run other MPLS OAM commands only after running the mpls-oam command to display the MPLS-OAM view.

Prerequisites

MPLS OAM has been globally enabled using the mpls oam command.

Configuration Impact

After the undo mpls-oam command is run, the MPLS-OAM view and MPLS OAM configurations are deleted.

Follow-up Procedure

Run the mpls oam l2vc command to configure detection parameters.

# Display the MPLS-OAM view.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls oam
[*HUAWEI-mpls] quit
[*HUAWEI] mpls-oam