reset mpls te auto-tunnel p2mp

Function

The reset mpls te auto-tunnel p2mp command restarts a specified automatic P2MP TE tunnel.

Format

reset mpls te auto-tunnel p2mp name tunnel-name

Parameters

Parameter Description Value
name tunnel-name

Specifies the name of a tunnel interface.

-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
mpls-te debug

Usage Guidelines

Usage Scenario

If errors occur in services transmitted on an automatic P2MP TE tunnel and the services cannot be restored, run the reset mpls te auto-tunnel p2mp command in the user view to reestablish the P2MP TE tunnel to restore the services.

Configuration Impact

After this command is run, all LSPs in the specified tunnel are torn down and reestablished.

Example

# Restart an automatic P2MP TE tunnel named P2MP132769.
<HUAWEI> reset mpls te auto-tunnel p2mp name P2MP132769
Parent Topic: MPLS TE Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >