reset mpls te auto-primary-tunnel

Function

The reset mpls te auto-primary-tunnel command restarts a specified automatic primary tunnel.

Format

reset mpls te auto-primary-tunnel name tunnel-name

Parameters

Parameter	Description	Value
name tunnel-name	Specifies a tunnel name.	-

Parameter

Description

Value

name tunnel-name

Specifies a tunnel name.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
mpls-te	debug

Usage Guidelines

Usage Scenario

If errors occur in services transmitted on a P2P TE tunnel and the services cannot be restored, run the reset mpls te auto-primary-tunnel command in the user view to reestablish the P2P TE tunnel to restore the services.

Configuration Impact

After this command is run, all LSPs in the specified tunnel are torn down and reestablished. If some LSPs are transmitting traffic, the operation causes a traffic interruption. Exercise caution when using this command.

Example

# Restart an automatic P2P TE tunnel named AutoTunnel32769.

<HUAWEI> reset mpls te auto-primary-tunnel name AutoTunnel32769