reset vxlan statistics l3-mode

Function

The reset vxlan statistics l3-mode command clears Layer 3 VXLAN traffic statistics.

Format

reset vxlan statistics l3-mode source source-ip peer peer-ip local-vni vni-id

reset vxlan statistics l3-mode source source-ip peer peer-ip remote-vni vni-id

Parameters

Parameter	Description	Value
peer peer-ip	Clears statistics about Layer 3 VXLAN traffic with a specified peer VTEP IP address.	The value is in dotted decimal notation.
local-vni	Clears statistics about upstream Layer 3 VXLAN traffic with a local VNI.	-
vni-id	Specifies the value of VNI ID.	The value is an integer ranging from 1 to 16777215.
source source-ip	Clears statistics about Layer 3 VXLAN traffic with a specified source VTEP IP address.	The value is in dotted decimal notation.
remote-vni	Clears statistics about downstream Layer 3 VXLAN traffic with a remote VNI.	-

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nvo3	execute

Usage Guidelines

Usage Scenario

Layer 3 VXLAN statistics can be collected. To clear the existing Layer 3 VXLAN statistics before collecting new statistics, run the reset vxlan statistics l3-mode command.

Precautions

Layer 3 VXLAN statistics will all be cleared and cannot restore in the following situations:

The reset vxlan statistics l3-mode command is run.
The device is restarted, and VXLAN tunnels are deleted.

Example

# Clear statistics about upstream Layer 3 VXLAN traffic with source VTEP IP address 1.1.1.1, peer VTEP IP address 1.1.1.2, and local VNI 1.

<HUAWEI> reset vxlan statistics l3-mode source 1.1.1.1 peer 1.1.1.2 local-vni 1