te inherit

Function

The te inherit command enables the function to inherit the TE configuration of an interface in the Flex-Algo link attribute application view.

The undo te inherit command cancels the configuration.

By default, an interface's TE configuration is not inherited in the Flex-Algo link attribute application view.

Format

te inherit

undo te inherit

Parameters

None

Views

Link attribute application view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

In the Flex-Algo link attribute application view, to inherit the configurations of the te metric and te link administrative group name commands on an interface, run the te inherit command. In the Flex-Algo link attribute application view, the te inherit command cannot co-exist with the metric or link administrative group name command.

Example

# Enable the function to inherit the TE configuration of an interface in the Flex-Algo link attribute application view.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
Warning: This operation will switch all TE common attributes configurations to TE mode. Continue? [Y/N]:Y
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] te link-attribute-application flex-algo
[*HUAWEI-GigabitEthernet0/1/0-te-link-attribute-application] te inherit