te bandwidth bc0 (Interface view)

Function

The te bandwidth bc0 command sets or modifies the bandwidth of a BC.

By default, no BC bandwidth is configured for a link.

Format

te bandwidth bc0 bc0Bw

Parameters

Parameter	Description	Value
bc0Bw	Specifies the bandwidth of BC0.	The value is an integer ranging from 0 to 4000000000, in kbit/s.

Parameter

Description

Value

bc0Bw

Specifies the bandwidth of BC0.

The value is an integer ranging from 0 to 4000000000, in kbit/s.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The te bandwidth bc0 command sets or modifies the bandwidth of a BC.

Precautions

MPLS TE-related commands apply only to MPLS TE and SR-MPLS TE. However, this command applies to SRv6 TE Policies, besides MPLS TE and SR-MPLS TE.

Example

# Set the bandwidth of BC0 to 1000 kbit/s.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth max-reservable-bandwidth 100000
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth bc0 1000