The te bandwidth command sets or modifies the bandwidth of a BC.
By default, no BC bandwidth is configured for a link.
| Parameter | Description | Value |
|---|---|---|
| bc0 bc0Bw |
Specifies the bandwidth of BC0. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc1 bc1Bw |
Specifies the bandwidth of BC1. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc2 bc2Bw |
Specifies the bandwidth of BC2. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc3 bc3Bw |
Specifies the bandwidth of BC3. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc4 bc4Bw |
Specifies the bandwidth of BC4. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc5 bc5Bw |
Specifies the bandwidth of BC5. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc6 bc6Bw |
Specifies the bandwidth of BC6. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
| bc7 bc7Bw |
Specifies the bandwidth of BC7. |
The value is an integer ranging from 0 to 4000000000, in kbit/s. |
100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view
Usage Scenario
In real-world situations, the command needs to be run only on the outbound interface of a link through which a TE tunnel passes.
If the command is run more than once, the latest configuration overrides the previous one.Precautions
MPLS TE-related commands apply only to MPLS TE and SR-MPLS TE. However, this command applies to SRv6 TE Policies, besides MPLS TE and SR-MPLS TE.