access-limit adjustment system-state

Function

The access-limit adjustment system-state enable command is used to deny BAS new user access when memory usage of interface broad or main control broad is 90%.

The undo access-limit adjustment system-state disable command is used to deny BAS new user access when memory usage of interface broad or main control broad is 90%.

The access-limit adjustment system-state disable command is used to allow BAS new user access when memory usage of interface broad or main control broad is 90%.

By default, deny BAS new user access when memory usage of interface broad or main control broad is 90%.

This command is supported only on the NetEngine 8000 F1A.

Format

access-limit adjustment system-state enable

access-limit adjustment system-state disable

undo access-limit adjustment system-state disable

Parameters

None

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa-access	debug

Usage Guidelines

Usage Scenario

access-limit adjustment system-state enable and undo access-limit adjustment system-state disable commands are used to deny BAS new user access when memory usage of interface broad or main control broad is 90%.

It is not recommended that you disable this function.

Configuration Impact

User type is new access BAS user(IPoe, PPPoE, Special user) and new access L2TP tunnel user.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Deny BAS new user access when memory usage of interface broad or main control broad is 90%.

<HUAWEI> system-view
[~HUAWEI] aaa
[*HUAWEI-aaa] access-limit adjustment system-state enable