access user-statistic complete-kpi enable

Function

The access user-statistic complete-kpi enable command enables the function to report the number of login successes, the number of login failures, and the login success rate as KPIs by domain, outer VLAN ID, or sub-interface.

The undo access user-statistic complete-kpi enable command disables the function to report the number of login successes, the number of login failures, and the login success rate as KPIs by domain, outer VLAN ID, or sub-interface.

By default, the function to report the number of login successes, the number of login failures, and the login success rate as KPIs by domain, outer VLAN ID, or sub-interface is not enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

access user-statistic complete-kpi enable

undo access user-statistic complete-kpi enable

Parameters

None

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

To record the number of login successes, the number of login failures, and the login success rate in real time in the KPI system, run the access user-statistic complete-kpi enable command in the AAA view to enable the function to report the number of login successes, the number of login failures, and the login success rate as KPIs by domain, outer VLAN ID, or sub-interface. This function effectively enhances network maintainability and reduces maintenance costs. The KPIs are reported every 15 minutes. In each period, only the user access statistics within this period are reported.

Precautions

In VS mode, this command is supported only by the admin VS.

If the reporting is based on sub-interfaces, only the information of PPPoE users is reported.

If the reporting is based on domains or outer VLAN IDs, information of all types of users is reported.

Example

# Enable the function to report the number of login successes, the number of login failures, and the login success rate as KPIs by domain, outer VLAN ID, or sub-interface.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] access user-statistic complete-kpi enable