access frame-ipv6 lease manage pool-exclude

Function

The access frame-ipv6 lease manage pool-exclude command enables the device to manage the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools.

The undo access frame-ipv6 lease manage pool-exclude command disables the device from managing the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools.

By default, the device does not manage the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools.

This command is supported only on the NetEngine 8000 F1A.

Format

access frame-ipv6 lease manage pool-exclude

undo access frame-ipv6 lease manage pool-exclude

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

By default, the device does not manage the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools. Management on users' IPv6 address leases depends only on the user client. If the client fails, the device is unaware of user address lease expiry. To enable the device to manage the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools, run the

access frame-ipv6 lease manage pool-exclude command. The device then deletes the entries of users whose leases expire and are not renewed, log them out, and displays the logout reason as lease expiry.

NOTE:

To enable the device to manage the leases of RADIUS-delivered IPv6 addresses that are in the supported address pools, run the frame-ipv6 lease manage command in the IPv6 prefix pool view.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the device to manage the leases of RADIUS-delivered IPv6 addresses that are not in the supported address pools.

<HUAWEI> system-view
[~HUAWEI] access frame-ipv6 lease manage pool-exclude