alarm finish time

Function

The alarm finish time command sets an alarm clearing anti-jitter time.

The undo alarm finish time command restores the default alarm clearing anti-jitter time.

By default, the alarm clearing anti-jitter time is 10000 milliseconds.

alarm finish time time

undo alarm finish time

Parameter	Description	Value
time time	Specifies an alarm clearing anti-jitter time.	The value is an integer ranging from 0 to 30000, in milliseconds. The step is 500. For example, the value can be 500, 1000, or 1500.

Parameter

Description

Value

time time

Specifies an alarm clearing anti-jitter time.

The value is an integer ranging from 0 to 30000, in milliseconds. The step is 500. For example, the value can be 500, 1000, or 1500.

MA view

2: Configuration level

Task Name	Operations
y1731	write

Usage Scenario

If a device detects that a fault alarm is generated without the time specified in the alarm finish time command from clearing alarm reporting, the device immediately reports a fault generation alarm.
If a device detects that a fault alarm is generated within the time specified in the alarm finish time command from clearing alarm reporting, the device reports a fault generation alarm after the time specified in the alarm occur time command elapses.

Prerequisites

An MD and an MA have been configured using the cfm md and ma commands, respectively.

# Set the alarm clearing anti-jitter time to 2000 milliseconds.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] alarm finish time 2000