The condition syslog pattern command configures Syslogs as the triggering condition for a maintenance assistant.
The undo condition command cancels the configuration.
By default, no triggering condition is configured for a maintenance assistant.
| Parameter | Description | Value |
|---|---|---|
| reg-express |
Specifies the formula expression of a Syslog. |
The value is a string of 1 to 255 case-sensitive characters, spaces not supported. |
| occurs occur-number |
Specifies the number of times a Syslog is generated. |
The value is an integer ranging from 1 to 32. |
| period period-value |
Specifies the period during which a Syslog is generated. |
The value is an integer ranging from 1 to 4294967295. |
Usage Scenario
After a maintenance assistant is created, a triggering condition must be specified so that the maintenance assistant can be automatically operated as long as the triggering condition is met.
To trigger a maintenance assistant based on a Syslog, run the condition syslog pattern command.
Prerequisites
The assistant command has been run in the system view to create a maintenance assistant.
Precautions
A maintenance assistant can be configured with only one triggering condition.