condition snmp-notification

Function

The condition snmp-notification command configures an SNMP trap OID as the triggering condition of a maintenance assistant.

The undo condition command cancels the configuration.

By default, no triggering condition is configured for a maintenance assistant.

Format

condition snmp-notification oid oid-string [ optype oid-value ]

Parameters

Parameter	Description	Value
optype	Specifies the type of the comparison between the OID of the generated SNMP trap and the configured SNMP trap OID.	The value can be: eq: equal to ne: not equal to It: less than le: less than or equal to gt: greater than ge: greater than or equal to
oid-value	Specifies an OID expressed in numbers.	The value is an integer ranging from -2147483648 to 2147483647.
oid oid-string	Specifies the OID of an SNMP trap.	The value is an integer ranging from 1 to 127.

Parameter

Description

Value

optype

Specifies the type of the comparison between the OID of the generated SNMP trap and the configured SNMP trap OID.

The value can be:

eq: equal to
ne: not equal to
It: less than
le: less than or equal to
gt: greater than
ge: greater than or equal to

oid-value

Specifies an OID expressed in numbers.

The value is an integer ranging from -2147483648 to 2147483647.

oid oid-string

Specifies the OID of an SNMP trap.

The value is an integer ranging from 1 to 127.

Views

Maintenance assistant task view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ops	write

Usage Guidelines

Usage Scenario

After a maintenance assistant is created, a triggering condition must be specified so that the maintenance assistant can be automatically operated as long as the triggering condition is met.

An OPS maintenance assistant can be triggered upon an alarm or event. The commands for configuring different triggering conditions for an OPS maintenance assistant vary.

To configure an SNMP trap OID as the triggering condition of a maintenance assistant, run the condition snmp-notification command.

Prerequisites

The assistant command has been run in the system view to create a maintenance assistant.

Precautions

A maintenance assistant can be configured with only one triggering condition.

Example

# Configure a maintenance assistant to be triggered based on the OID 1.3.6.1.4.1.2011.5.25.136.1.6.8 expressed in numbers 222.

<HUAWEI> system-view
[~HUAWEI] ops
[~HUAWEI-ops] assistant task
[*HUAWEI-ops-assistant-task] condition snmp-notification oid 1.3.6.1.4.1.2011.5.25.136.1.6.8 eq 222