authentication-name(dynamic-pool)

Function

The authentication-name command configures an authentication name and a password for the BRAS to apply to a RADIUS server for dynamic address segments.

The undo authentication-name command deletes an authentication name and a password used by the BRAS to apply to a RADIUS server for dynamic address segments.

By default, no authentication name or password is configured for the BRAS to apply to a RADIUS server for dynamic address segments.

This command is supported only on the NetEngine 8000 F1A.

Format

authentication-name authentication-name password cipher password

undo authentication-name [ authentication-name [ password cipher [ password ] ] ]

Parameters

Parameter	Description	Value
authentication-name	Specifies an authentication name used for applying for dynamic address segments.	The value is a string of 1 to 253 case-insensitive characters.
password	Sets password.	-
cipher password	Specifies a password used for applying for dynamic address segments.	The value is a string of 1 to 16 or 1 to 128 characters. There is no requirement for the password strength. The encryption mode must be AES256.

Parameter

Description

Value

authentication-name

Specifies an authentication name used for applying for dynamic address segments.

The value is a string of 1 to 253 case-insensitive characters.

password

Sets password.

cipher password

Specifies a password used for applying for dynamic address segments.

The value is a string of 1 to 16 or 1 to 128 characters. There is no requirement for the password strength. The encryption mode must be AES256.

Views

IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

After a dynamic address pool is configured on a RADIUS server, run the authentication-name command to configure an authentication name and a password for the BRAS to apply to the RADIUS server for dynamic address segments.

Precautions

In VS mode, this command is supported only by the admin VS.

After a dynamic address segment is locally saved on the BRAS, you cannot delete the authentication name or password.

Example

# Configure an authentication name dap and a password abc@123 for the BRAS to apply to a RADIUS server for dynamic address segments.

<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas dynamic
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] authentication-name dap password cipher abc@123