clear auto-block

Function

The clear auto-block command clears the automatic locking status of an DHCP address pool.

This command is supported only on the NetEngine 8000 F1A.

Format

clear auto-block

Parameters

None

Views

IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	debug

Usage Guidelines

Usage Scenario

If an address pool is abnormal, address allocation fails. If an address pool is selected but address allocation fails for 10 consecutive times, the system automatically locks the address pool. To manually unlock an address pool that has been automatically locked by the system, run the clear auto-block command.

Configuration Impact

After this command is run, the automatic locking status of the DHCP address pool, the number of automatic locking times, and the number of consecutive address allocation failures are all cleared.

Precautions

This command is supported only on the admin VS.

This command clears the automatic locking status of an DHCP address pool, but does not remove the automatic locking function of this DHCP address pool. By default, the automatic locking function is enabled for DHCP address pools.

Example

# Clear the automatic locking status of the IP address pool pool1.

<HUAWEI> system-view
[~HUAWEI] ip pool pool1 bas local
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-pool1] commit
[~HUAWEI-ip-pool-pool1] clear auto-block

# Clear the automatic locking status of the IP address pool huawei.

<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas local
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] clear auto-block