avp nas-port enable

Function

The avp nas-port enable command enables an LAC to encapsulate the NAS-Port attribute into the AVP100 field of an ICRQ message to be sent to an LNS and enables an LNS to parse the NAS-Port attribute carried in the AVP100 field of an ICRQ message received from an LAC.

The undo avp nas-port enable command disables an LAC from encapsulating the NAS-Port attribute into the AVP100 field of an ICRQ message to be sent to an LNS and disables an LNS from parsing the NAS-Port attribute carried in the AVP100 field of an ICRQ message received from an LAC.

By default, an LAC does not encapsulate the NAS-Port attribute into the AVP100 field of an ICRQ message to be sent to an LNS and an LNS does not parse the NAS-Port attribute carried in the AVP100 field of an ICRQ message received from an LAC.

This command is supported only on the NetEngine 8000 F1A.

Format

avp nas-port enable

undo avp nas-port enable

Parameters

None

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

To enable an LAC to send the NAS-Port attribute to an LNS, run the avp nas-port enable command on the LAC or the LAC-side of an LTS so that the NAS-Port attribute is carried in the AVP100 field of an ICRQ message to be sent to the LNS. To enable an LNS to parse the NAS-Port attribute carried in the AVP100 field of an ICRQ message, run the avp nas-port enable command on the LNS or the LNS-side of an LTS.

Example

# Enable an LAC to encapsulate the NAS-Port attribute into the AVP100 field of an ICRQ message to be sent to an LNS.

<HUAWEI> system-view
[~HUAWEI] l2tp-group huawei
[*HUAWEI-l2tp-huawei] avp nas-port enable