The backup-id remote-backup-service command configures a backup ID for an RBP and associates the RBP with a specified RBS.
The undo backup-id remote-backup-service command deletes the backup ID configured for an RBP and removes the association between the RBP and a specified RBS.
By default, no backup ID is configured for an RBP and no RBP is associated with an RBS.
| Parameter | Description | Value |
|---|---|---|
| backup-id |
Specifies a backup ID for an RBP. |
The value is an integer ranging from 1 to 4095. |
| service-name |
Specifies the name of an RBS. |
The value is a string of 1 to 32 case-insensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
To enable a device to use a backup ID and RBS to find an RBP, run the backup-id remote-backup-service command to configure the backup ID for the RBP and associates the RBP with the RBS.
Prerequisites
An RBS has been created using the remote-backup-service service-name command.
Precautions
The backup IDs configured for the same RBP must be the same on the master and backup devices and can no longer be configured for other RBPs.
<HUAWEI> system-view [~HUAWEI] remote-backup-service rbs [*HUAWEI-rm-backup-srv-rbs] peer 2.2.2.2 source 1.1.1.1 port 6006 [*HUAWEI-rm-backup-srv-rbs] quit [*HUAWEI] remote-backup-profile rpf [*HUAWEI-rm-backup-prf-rpf] backup-id 10 remote-backup-service rbs