billing-server type

Function

The billing-server type command configures the accounting server type.

By default, the device considers all accounting servers supporting the dynamic policy.

This command is supported only on the NetEngine 8000 F1A.

Format

billing-server type { 1 | 2 }

Parameters

Parameter	Description	Value
1	Specifies the dynamic policy switch mode.	-
2	Specifies the normal policy switch mode.	-

Parameter

Description

Value

Specifies the dynamic policy switch mode.

Specifies the normal policy switch mode.

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

The billing-server type command is used to configure the system to control whether a user in the domain is allowed to switch to the value-added service policy template dynamically. By default, the user is allowed to switch to the value-added service policy template dynamically. After the template is switched, the user sends a stop-accounting packet and a start-accounting packet. When the normal policy switch mode is configured, the user obtains the QoS parameters of the new template, updates the configuration, and then sends a real-time accounting packet.

Configuration Impact

In dynamic policy switch mode, the user is not charged with the tariff level after the policy server releases a new template and a new accounting service is generated.
In normal policy switch mode, the policy server releases a new template and the user can only obtain the QoS parameters in it. After the bandwidth restriction is updated, the system sends a real-time accounting packet.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the accounting server as a server that supports the dynamic policy.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain domain1
[~HUAWEI-aaa-domain-domain1] billing-server type 1