binding-pw-up trigger unblock-delay

Function

The binding-pw-up trigger unblock-delay command sets a hold-off time for unblocking service VSI PWs after the protocol VSI PWs bound to an L2VPN monitoring group go Up.

The undo binding-pw-up trigger unblock-delay command restores the default hold-off time for unblocking service VSI PWs after the protocol VSI PWs bound to an L2VPN monitoring group go Up.

By default, service VSI PWs will be unblocked in 2s after the protocol VSI PWs bound to an L2VPN monitoring group go Up.

Format

binding-pw-up trigger unblock-delay delay-time

undo binding-pw-up trigger unblock-delay delay-time

Parameters

Parameter	Description	Value
delay-time	Specifies a hold-off time for unblocking service VSI PWs.	The value is an integer ranging from 1 to 60, in seconds. The default value is 2s.

Parameter

Description

Value

delay-time

Specifies a hold-off time for unblocking service VSI PWs.

The value is an integer ranging from 1 to 60, in seconds. The default value is 2s.

Views

mpls-l2vpn-monitor-group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

After an L2VPN monitoring group is created and bound to protocol VSI PWs, you need to run the binding-pw-up trigger unblock-delay command to set a hold-off time for unblocking service VSI PWs after the protocol VSI PWs go Up.

Precautions

If the binding-pw-up trigger unblock-delay command is run after a hold-off timer is started, the newly configured hold-off timer is used.

Example

# Set the hold-off time for unblocking service VSI PWs to 5s after the protocol VSI PWs bound to an L2VPN monitoring group go Up.

<HUAWEI> system-view
[~HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] monitor-group group1
[*HUAWEI-l2vpn-monitor-group-group1] binding-pw-up trigger unblock-delay 5