br-ipv6-address (MAP-E instance view)

Function

The br-ipv6-address command configures a local IPv6 address.

The undo br-ipv6-address command deletes a local IPv6 address.

By default, no local IPv6 address is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

br-ipv6-address br-name

undo br-ipv6-address [ br-name ]

Parameters

Parameter	Description	Value
br-name	Specifies the name of a BR.	The value is a string of 1 to 31 characters.

Parameter

Description

Value

br-name

Specifies the name of a BR.

The value is a string of 1 to 31 characters.

Views

MAP-E instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
map	write

Usage Guidelines

Usage Scenario

A CPE sends packets carrying a destination IP address that is set to the BR's local IPv6 address. To configure a local IPv6 address, run the br-ipv6-address command.

Precautions

A single local IPv6 address can be configured in each MAP-E instance. The local IPv6 address is mutually exclusive with an interface IP address, an address in a BRAS address pool, and a PCPv6 server address.

Example

# Create a MAP-E instance named test, access the MAP-E instance view, and configure a local IPv6 address for a BR named br1.

<HUAWEI> system-view
[~HUAWEI] map-e instance test id 111
[*HUAWEI-mape-instance-test] br-ipv6-address br1