ccm tlv interface-status

Function

The ccm tlv interface-status command enables continuity check messages (CCMs) to carry the Interface Status TLV field.

The undo ccm tlv interface-status command disables CCMs from carrying the Interface Status TLV field.

By default, CCMs do not carry the Interface Status TLV field.

Format

ccm tlv interface-status

undo ccm tlv interface-status

Parameters

None

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

On the network with an inward maintenance association end point (MEP) configured, Y.1731 is used to collect performance statistics about the network. If the interface on which the inward MEP is configured goes Down, you can run the ccm tlv interface-status command to enable CCMs to carry the Interface Status TLV field. Sending the CCMs with this field to a peer device enables the peer device to detect the network fault rapidly.

Additionally, running the ccm tlv interface-status command ensures communication between a Huawei device and a non-Huawei device that has the Interface Status TLV field carried in CCMs.

Example

# Enable CCMs to carry the Interface Status TLV field.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] ccm tlv interface-status