clock bits lti-action-2mbps

Function

The clock bits lti-action-2mbps command configures output actions for BITS interfaces when the 2M ring does not trace the clock source.

The undo clock bits lti-action-2mbps command disables the output actions for BITS interfaces when the 2M ring does not trace the clock source.

By default, BITS interfaces do not output clock signals when the 2M ring does not trace the clock source.

Format

clock bits bits0 lti-action-2mbps { send-dnu | send-ais }

undo clock bits bits0 lti-action-2mbps [ send-dnu | send-ais ]

Parameters

Parameter Description Value
bits0

Indicates that the external BITS clock source is a BITS0 interface.

-
send-dnu

Indicates the DNU level.

-
send-ais

Indicates the sent AIS information.

-

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
clksync write

Usage Guidelines

Usage Scenario

To configure output actions for BITS interfaces when the 2M ring does not trace the clock source, run the clock bits lti-action-2mbps command.

Precautions

In VS mode, this command is supported only by the admin VS.

This command configuration is effective only when the BITS signal type is set to 2 Mbps.

Example

# Configure the output action of the BITS0 interface to DNU when the 2M ring does not trace the clock source.
<HUAWEI> system-view
[~HUAWEI] clock bits bits0 lti-action-2mbps send-dnu
Parent Topic: Physical Layer Clock Synchronization Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >