master admin-ip primary

Function

The master admin-ip primary command configures the masters for an AP.

The undo master admin-ip command restores the default configuration.

By default, no master is configured for an AP.

Format

master admin-ip primary primary-ip-addr

undo master admin-ip

Parameters

Parameter	Description	Value
primary-ip-addr	Specifies the management IP address of the master.	The value is in dotted decimal notation.

Parameter

Description

Value

primary-ip-addr

Specifies the management IP address of the master.

The value is in dotted decimal notation.

Views

Virtual access view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
virtual-access	write

Usage Guidelines

Usage Scenario

A master delivers the master admin-ip primary command to an AP, and the AP automatically runs the command and saves it to a configuration file. You do not need to run the command.

Prerequisites

Global enable port extension, configuration of AP roles.

Precautions

When you directly log in to an AP:

If the AP has established a NETCONF channel to a master, the master admin-ip primary command cannot be run.
If the AP has not established a NETCONF channel to a master, the master admin-ip primary command can be run.

This command is supported only on the admin VS.

Example

# Specify the masters for an AP based on management IP addresses.

<HUAWEI> system-view
[~HUAWEI] virtual-access
[~HUAWEI-virtual-access] master admin-ip primary 10.1.1.9