mpls l2vpn default martini

Function

The mpls l2vpn default martini command disables an LDP PW endpoint from sending Notification messages.

The undo mpls l2vpn default martini command restores the default configuration.

By default, an LDP PW endpoint can send Notification messages.

Format

mpls l2vpn default martini

undo mpls l2vpn default martini

Parameters

None

Views

MPLS-L2VPN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

According to initial drafts, LDP PW endpoints do not support Notification messages. Relevant standards, however, defines that LDP PW endpoints can use Notification messages for service processing. Before configuring a device that supports Notification messages to communicate with a device that does not support Notification messages over an LDP PW, run the mpls l2vpn default martini command on the device that supports Notification messages.

Prerequisites

MPLS L2VPN has been enabled using the mpls l2vpn command.

Precautions

The mpls l2vpn default martini command can only be run on devices that do not have VPWS or VPLS services. If you need to run this command on a device that has VPWS or VPLS services, delete these services first.

PW redundancy cannot work properly inLDP mode.

Example

# Enable an LDP PW endpoint to send Notification messages again.

<HUAWEI> system-view
[~HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] undo mpls l2vpn default martini

# Disable an LDP PW endpoint from sending Notification messages.

<HUAWEI> system-view
[~HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] mpls l2vpn default martini