destination-group (Telemetry view)

Function

The destination-group command creates one or more destination groups to which the data sampled is sent and enters the Destination-group view.

The undo destination-group command deletes a destination group to which the data sampled is sent.

By default, no destination groups to which the data sampled is sent are created.

Format

destination-group destination-group-name

undo destination-group destination-group-name

Parameters

Parameter	Description	Value
destination-group-name	Specifies the name of a destination group to which the data sampled is sent.	The value is a string of 1 to 64 case-sensitive characters containing letters and digits. Spaces are not supported between letters or digits.

Parameter

Description

Value

destination-group-name

Specifies the name of a destination group to which the data sampled is sent.

The value is a string of 1 to 64 case-sensitive characters containing letters and digits. Spaces are not supported between letters or digits.

Views

Telemetry view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telemetry	write

Usage Guidelines

Usage Scenario

To create one or more destination groups to receive the data sampled and sent by devices, run the destination-group command in the Telemetry view.

Precautions

A maximum of five destination groups can be associated to each subscription using this command. At most five combinations, each consisting of an IP address, a port number, and a VPN instance, can be configured for all destination groups. A destination group takes effect only after it is associated to a subscription in the Subscription view.If a destination group has been associated, it cannot be deleted using the undo destination-group command.

Example

# Create a destination group named a to which the data sampled is sent in the Telemetry view.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] destination-group a