destination-group (Subscription view)

Function

The destination-group command associates a destination group to which the data sampled is sent.

The undo destination-group command deletes a destination group that is associated.

By default, no destination group is associated.

Format

destination-group destination-name

undo destination-group destination-name

Parameters

Parameter	Description	Value
destination-name	Specifies the name of a destination group to which the data sampled is sent.	The value is a string of 1 to 64 case-sensitive characters. The value is the name of an existing Destination-group.

Parameter

Description

Value

destination-name

Specifies the name of a destination group to which the data sampled is sent.

The value is a string of 1 to 64 case-sensitive characters. The value is the name of an existing Destination-group.

Views

Subscription view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telemetry	write

Usage Guidelines

Usage Scenario

To enable a destination group that is created in the Telemetry view to take effect, run the destination-group command in the Subscription view to associate it.

Precautions

A maximum of five destination groups can be associated with each subscription using this command. Five IP addresses and five port numbers can be configured for each destination group.

The destination group that is associated in the Subscription view must be created in the Telemetry view first. Otherwise, association fails.

Example

# Create a destination group named a in the Telemetry view and associate it in the Subscription view.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] destination-group a
[*HUAWEI-telemetry-destination-group-a] quit
[*HUAWEI-telemetry] subscription aa
[*HUAWEI-telemetry-subscription-aa] destination-group a