dhcp discover-speed-threshold
Function
The dhcp discover-speed-threshold command configures the speed threshold at which discover packets are received.
The undo dhcp discover-speed-threshold command deletes the speed threshold at which discover packets are received.
By default, the speed at which discover packets are received is not specified.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| packet-number |
Specifies the maximum number of discover packets that are received within a specified time period. |
The value is an integer that ranges from 1 to 3000. |
| seconds |
Specifies the maximum number of discover packets that are received within a specified time period. |
The value is an integer that ranges from 1 to 10. |
Usage Guidelines
Usage Scenario
The dhcp discover-speed-threshold command is used when the speed at which users go online needs to be limited.
Configuration Impact
The more discover packets are received within a specified time period, the faster users go online.
Precautions
In VS mode, this command is supported only by the admin VS.