dhcpv6 relay pd-route auto-save maximum

Function

The dhcpv6 relay pd-route auto-save maximum command configures the maximum number of entries in the PD route user table to be written into a file.

The undo dhcpv6 relay pd-route auto-save maximum command restores the default configuration.

By default, the maximum number of entries in the PD route user table to be written into a file is 40960.

Format

dhcpv6 relay pd-route auto-save maximum number

undo dhcpv6 relay pd-route auto-save maximum [ number ]

Parameters

Parameter Description Value
maximum number

Specifies the maximum number of entries in the PD route user table to be written into a file.

The value is an integer that ranges from 40960 to 1310720. The default value is 40960.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
dhcp write

Usage Guidelines

Usage Scenario

In prefix allocation scenarios, after the function of saving PD routes to a file is enabled, a maximum of 40960 user entries can be recorded in the file by default. When the number of user entries generated on the device exceeds 40960, you can configure the number of user entries that can be recorded in the file as required.

Example

# Set the the maximum number of entries in the PD route user table to be written into a file to 50000.
<HUAWEI> system-view
[~HUAWEI] dhcpv6 relay pd-route auto-save maximum 50000
Parent Topic: DHCPv6 Relay Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >