diameter gx ccri retransmit

Function

The diameter gx ccri retransmit command configures the number of CCR-I message retransmissions, number of retransmission rounds, and retransmission interval between rounds on a Gx interface.

The undo diameter gx ccri retransmit command restores the default configuration.

By default, the numbers of CCR-I message retransmissions and retransmission rounds are both 1 on a Gx interface.

This command is supported only on the NetEngine 8000 F1A.

Format

diameter gx ccri retransmit retry-times

diameter gx ccri retransmit round round-num round-timeout timeout-num

undo diameter gx ccri retransmit [ retry-times ]

undo diameter gx ccri retransmit round [ round-num round-timeout timeout-num ]

Parameters

Parameter	Description	Value
retransmit retry-times	Specifies the number of CCR-I message retransmissions on a Gx interface.	The value is an integer ranging from 2 to 10.
round round-num	Specifies the number of CCR-I message retransmission rounds on a Gx interface.	The value is an integer ranging from 1 to 5.
round-timeout timeout-num	Specifies a retransmission interval between rounds.	The value is an integer ranging from 15 to 80, in minutes.

Parameter

Description

Value

retransmit retry-times

Specifies the number of CCR-I message retransmissions on a Gx interface.

The value is an integer ranging from 2 to 10.

round round-num

Specifies the number of CCR-I message retransmission rounds on a Gx interface.

The value is an integer ranging from 1 to 5.

round-timeout timeout-num

Specifies a retransmission interval between rounds.

The value is an integer ranging from 15 to 80, in minutes.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

If a device sends a CCR-I message to a Diameter server but does not receive a CCA-I message from the Diameter server within 70s, users fail to obtain a bandwidth policy. If a large number of users do not obtain a bandwidth policy, you can run the diameter gx ccri retransmit command to change the number of CCR-I message retransmissions, number of retransmission rounds, and retransmission interval between rounds, increasing the bandwidth policy obtainment success rate.

Precautions

In VS mode, this command is supported only by the admin VS.

The interval between two retransmissions in each round does not need to be configured. The default interval is 70s.

Example

# Set the number of CCR-I message retransmission rounds to 2 and a retransmission interval between rounds to 30 minutes.

<HUAWEI> system-view
[~HUAWEI] diameter enable
[~HUAWEI] diameter gx ccri retransmit round 2 round-timeout 30

# Set the number of CCR-I message retransmissions to 2.

<HUAWEI> system-view
[~HUAWEI] diameter enable
[~HUAWEI] diameter gx ccri retransmit 2