diameter gx event-trigger version

Function

The diameter gx event-trigger version command changes the Usage_Report value of Event-Trigger.

The undo diameter gx event-trigger version command restores the default Usage_Report value of Event-Trigger.

The default Usage_Report value of Event-Trigger is 26. That is, the default version is v9.4.0.

This command is supported only on the NetEngine 8000 F1A.

Format

diameter gx event-trigger version { r940 | r970 }

undo diameter gx event-trigger version [ r940 | r970 ]

Parameters

Parameter	Description	Value
r940	Indicates v9.4.0. That is, the Usage_Report value is 26.	-
r970	Indicates v9.7.0. That is, the Usage_Report value is 33.	-

Parameter

Description

Value

r940

Indicates v9.4.0. That is, the Usage_Report value is 26.

r970

Indicates v9.7.0. That is, the Usage_Report value is 33.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
diameter	write

Usage Guidelines

Usage Scenario

To enable Diameter to interwork with a device on the live network, run the diameter gx event-trigger version command to change the Usage_Report value of Event-Trigger to 26 or 33 to adapt to v9.4.0 or v9.7.0.

Precautions

If the Usage_Report value of Event-Trigger is set to 26 on a device but is 33 on a server, service quotas fail to be delivered.
If the Usage_Report value of Event-Trigger is set to 33 on a device but is 26 on a server, service quotas are successfully delivered. However, quota exhaustion information fails to be reported to the server.
Service quotas are successfully delivered and quota exhaustion information are successfully reported to the server only when the Usage_Report value of Event-Trigger is the same on a device and server.

Example

# Set the version of Event-Trigger to V9.7.0.

<HUAWEI> system-view
[~HUAWEI] diameter gx event-trigger version R970