display mpls te tunnel locked-path

Function

The display mpls te tunnel locked-path command displays locked path attributes of a tunnel on the local node.

Format

display mpls te tunnel locked-path [ tunnel-name tunnel-name ] [ lsp-id ingress-lsr-id session-id egress-lsr-id local-lsp-id ]

Parameters

Parameter	Description	Value
tunnel-name tunnel-name	Specifies the name of a tunnel.	The value is a string of 1 to 255 case-sensitive characters. It cannot contain spaces.
lsp-id	Specifies the LSP ID.	-
ingress-lsr-id	Specifies the ingress LSR ID.	This value is in dotted decimal notation.
session-id	Specifies the ID of a session.	The value is an integer that ranges from 0 to 65535.
egress-lsr-id	Specifies the egress LSR ID.	This value is in dotted decimal notation.
local-lsp-id	Specifies the local LSP ID.	The value is an integer that ranges from 0 to 65535.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

To check locked path attributes of a tunnel on the local node, run the display mpls te tunnel locked-path command. The command output helps locate faults.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display locked path attributes of a tunnel on the local node.

<HUAWEI> display mpls te tunnel locked-path
Tunnel Interface Name : Tunnel1
 Lsp ID : 1.1.1.1 :1 :610
 Locked-Hop Information
  Hop 1   10.1.1.1
  Hop 2   10.1.1.2
  Hop 3   2.2.2.2

**Table 1** Description of the **display mpls te tunnel locked-path** command output
Item	Description
Tunnel Interface Name	Name of a tunnel interface.
Lsp ID	LSP ID of the ingress.
Locked-Hop Information	Number and IP address of each hop on the locked path.