display mpls te tunnel (All views)

Function

The display mpls te tunnel command displays information about an MPLS TE tunnel.

Format

display mpls te tunnel [ destination { ip-address | host-name host-name } ] [ lsp-id ingress-lsr-id session-id local-lsp-id ] [ lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ] [ { incoming-interface | interface | outgoing-interface } { interface-type interface-number | interface-name } ] [ verbose ]

display mpls te tunnel { bypass-inuse { inuse | not-exists | exists-not-used } } [ verbose ]

display mpls te tunnel diagnostic

Parameters

Parameter Description Value
destination ip-address

Destination address.

The value is in dotted decimal notation.
host-name host-name

Host name.

The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
lsp-id

Tunnel LSP ID.

-
ingress-lsr-id

Ingress LSR ID.

The value is in dotted decimal notation.
session-id

Session ID.

The value is an integer ranging from 0 to 65535.
local-lsp-id

LSP ID.

The value is an integer ranging from 0 to 65535.
lsr-role

Restrict display tunnels with specified lsr-role.

-
all

Display all Tunnel Info.

-
egress

Tunnels that terminate locally.

-
ingress

Tunnels that originate locally.

-
remote

Transit or egress tunnels.

-
transit

Tunnels that transit locally.

-
name tunnel-name

Tunnel Name.

The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
incoming-interface

Incoming interface of forwarding entry.

-
interface

Specify an interface.

-
outgoing-interface

Outgoing interface of forwarding entry.

-
interface-type

Specifies the interface type.

-
interface-number

Specifies the interface number.

-
interface-name

Interface name.

-
verbose

Show verbose information.

-
bypass-inuse

Display tunnels by bypass inuse status.

-
inuse

Bypass is inuse.

-
not-exists

Bypass does not exist.

-
exists-not-used

Bypass exists but is not used.

-
diagnostic

List the Te tunnel.

-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name Operations
mpls-te read

Usage Guidelines

Usage Scenario

The output of the display mpls te tunnel verbose command varies according to a signaling protocol used by MPLS TE tunnels.

The display mpls te tunnel bypass-inuse command displays information about only tunnels with TE FRR enabled.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about an MPLS TE tunnel.
<HUAWEI> display mpls te tunnel verbose
No                      :  1
Tunnel-Name             :  Tunnel1
Tunnel Interface Name   :  Tunnel1
TunnelIndex             :  - 
Session ID              :  1           LSP ID            :  535
LSR Role                :  Ingress
Ingress LSR ID          :  1.1.1.9
Egress LSR ID           :  4.4.4.9
In-Interface            :  -
Out-Interface           :  Eth-trunk1
Sign-Protocol           :  RSVP TE     Resv Style        :  SE
IncludeAnyAff           :  0x0         ExcludeAnyAff     :  0x0
IncludeAllAff           :  0x0  
ER-Hop Table Index      :  -           AR-Hop Table Index:  -
C-Hop Table Index       :  6753
PrevTunnelIndexInSession:  -           NextTunnelIndexInSession:  -
PSB Handle              :  -
Created Time            :  2012/02/02 05:12:27
RSVP LSP Type           :  -
--------------------------------
          DS-TE Information
--------------------------------
Bandwidth Reserved Flag :  Reserved
CT0 Bandwidth(Kbit/sec) :  20000       CT1 Bandwidth(Kbit/sec):  0
CT2 Bandwidth(Kbit/sec) :  0           CT3 Bandwidth(Kbit/sec):  0
CT4 Bandwidth(Kbit/sec) :  0           CT5 Bandwidth(Kbit/sec):  0
CT6 Bandwidth(Kbit/sec) :  0           CT7 Bandwidth(Kbit/sec):  0
Setup-Priority          :  7           Hold-Priority          :  7
--------------------------------
            FRR Information
--------------------------------
Primary LSP Info
Bypass In Use           :  Not Exists
Bypass Tunnel Id        :  0
BypassTunnel            :  -
Bypass LSP ID           :  -           FrrNextHop        :  -
ReferAutoBypassHandle   :  -
FrrPrevTunnelTableIndex :  -           FrrNextTunnelTableIndex:  -
Bypass Attribute(Not configured)
Setup Priority          :  -           Hold Priority     :  -           
HopLimit                :  -           Bandwidth         :  -           
IncludeAnyGroup         :  -           ExcludeAnyGroup   :  -           
IncludeAllGroup         :  -           
Bypass Unbound Bandwidth Info(Kbit/sec)
CT0 Unbound Bandwidth   :  -         CT1 Unbound Bandwidth:  -
CT2 Unbound Bandwidth   :  -         CT3 Unbound Bandwidth:  -
CT4 Unbound Bandwidth   :  -         CT5 Unbound Bandwidth:  -
CT6 Unbound Bandwidth   :  -         CT7 Unbound Bandwidth:  -
--------------------------------
           BFD Information
--------------------------------
NextSessionTunnelIndex  :  -           PrevSessionTunnelIndex:  -
NextLspId               :  -           PrevLspId         :  -
# Display detailed information about an MPLS TE tunnel after configuring MPLS Detour FRR.
<HUAWEI> display mpls te tunnel verbose
No                      :  1
Tunnel-Name             :  Tunnel1
Tunnel Interface Name   :  Tunnel1
TunnelIndex             :  - 
Session ID              :  100         LSP ID            :  23
LSR Role                :  Ingress
Ingress LSR ID          :  1.1.1.1
Egress LSR ID           :  5.5.5.5
In-Interface            :  -
Out-Interface           :  GE0/1/1
Sign-Protocol           :  RSVP TE     Resv Style        :  SE
IncludeAnyAff           :  0x0         ExcludeAnyAff     :  0x0
IncludeAllAff           :  0x0  
ER-Hop Table Index      :  -           AR-Hop Table Index:  162
C-Hop Table Index       :  65
PrevTunnelIndexInSession:  -           NextTunnelIndexInSession:  -
PSB Handle              :  -
Created Time            :  2014-11-28 18:47:52
RSVP LSP Type           :  -
--------------------------------
          DS-TE Information
--------------------------------
Bandwidth Reserved Flag :  Unreserved
CT0 Bandwidth(Kbit/sec) :  0           CT1 Bandwidth(Kbit/sec):  0
CT2 Bandwidth(Kbit/sec) :  0           CT3 Bandwidth(Kbit/sec):  0
CT4 Bandwidth(Kbit/sec) :  0           CT5 Bandwidth(Kbit/sec):  0
CT6 Bandwidth(Kbit/sec) :  0           CT7 Bandwidth(Kbit/sec):  0
Setup-Priority          :  7           Hold-Priority          :  7
--------------------------------
            FRR Information
--------------------------------
Primary LSP Info
Bypass In Use           :  Not Exists
Bypass Tunnel Id        :  0
BypassTunnel            :  -
Bypass LSP ID           :  -           FrrNextHop        :  -
ReferAutoBypassHandle   :  -
FrrPrevTunnelTableIndex :  -           FrrNextTunnelTableIndex:  -
Bypass Attribute
Setup Priority          :  7           Hold Priority     :  0
HopLimit                :  32          Bandwidth         :  0
IncludeAnyGroup         :  0           ExcludeAnyGroup   :  0
IncludeAllGroup         :  0
Bypass Unbound Bandwidth Info(Kbit/sec)
CT0 Unbound Bandwidth   :  -           CT1 Unbound Bandwidth:  -
CT2 Unbound Bandwidth   :  -           CT3 Unbound Bandwidth:  -
CT4 Unbound Bandwidth   :  -           CT5 Unbound Bandwidth:  -
CT6 Unbound Bandwidth   :  -           CT7 Unbound Bandwidth:  -
--------------------------------
           BFD Information
--------------------------------
NextSessionTunnelIndex  :  -           PrevSessionTunnelIndex:  -
NextLspId               :  -           PrevLspId         :  - 
--------------------------------
         DETOUR Information
--------------------------------
No:  1      
Detour Attribute
Detour PLR ID           :  10.1.2.1    Detour Avoid Node :  3.3.3.3
Detour In-Interface     :  -           DetourPHop        :  -
Detour Out-Interface    :  GE0/1/2     DetourNextHop     :  10.1.2.2
Setup Priority          :  7           Hold Priority     :  7
HopLimit                :  32          Bandwidth         :  0
IncludeAnyGroup         :  0           ExcludeAnyGroup   :  0
IncludeAllGroup         :  0
# Displays the tunnel information for the specified host name.
<HUAWEI> display mpls te tunnel destination host-name router1
 * means the LSP is detour LSP                    
 -------------------------------------------------------------------------------
 Ingress LsrId   Destination     LSPID In/OutLabel     R Tunnel-name
 -------------------------------------------------------------------------------
 2.2.2.2         1.1.1.1         1     3/-             E Tunnel1
 -------------------------------------------------------------------------------
 R: Role, I: Ingress, T: Transit, E: Egress
# Display information about an MPLS TE tunnel with the ingress IP address of 1.1.1.9, the tunnel ID of 1, and the LSP ID of 1.
<HUAWEI> display mpls te tunnel lsp-id 1.1.1.9 3052 1
* means the LSP is detour LSP
-------------------------------------------------------------------------------
Ingress LsrId   Destination     LSPID In/OutLabel     R Tunnel-name
-------------------------------------------------------------------------------
1.1.1.9         5.5.5.5         1     2750/3          T AutoTunnel3052
-------------------------------------------------------------------------------
R: Role, I: Ingress, T: Transit, E: Egress
# Display brief information about MPLS TE tunnels.
<HUAWEI> display mpls te tunnel diagnostic
* means the LSP is detour LSP
-------------------------------------------------------------------------------
LSP-Id                    Destination            In/Out-If
-------------------------------------------------------------------------------
1.1.1.1:100:1             3.3.3.3                -/GE0/1/0
1.1.1.1:100:2             3.3.3.3                -/GE0/1/8
-------------------------------------------------------------------------------
# Display information about MPLS TE tunnels.
<HUAWEI> display mpls te tunnel
* means the LSP is detour LSP
-------------------------------------------------------------------------------
Ingress LsrId   Destination     LSPID In/OutLabel     R Tunnel-name
-------------------------------------------------------------------------------
2.2.2.2         4.4.4.4         8     -/4100          I Tunnel1
4.4.4.4         2.2.2.2         7     3/-             E Tunnel1
-------------------------------------------------------------------------------
R: Role, I: Ingress, T: Transit, E: Egress
Table 1 Description of the display mpls te tunnel (All views) command output
Item Description
No

Sequence number.
Tunnel-Name

Tunnel name.
Tunnel Interface Name

Tunnel interface name.
TunnelIndex

Tunnel index.
Session ID

Tunnel ID.
LSP ID

LSP ID.
LSR Role

LSR role:

  • Ingress.
  • Egress.
  • Transit.
Ingress LsrId

Ingress LSR ID.
Ingress LSR ID

Ingress LSR ID formatted as X.X.X.X.
Egress LSR ID

Egress LSR ID.
In-Interface

Inbound interface name of a CR-LSP on the local node.
Out-Interface

Outbound interface name of a CR-LSP on the local node.
Sign-Protocol

Signaling protocol:

  • RSVP TE.
  • Segment-Routing.
  • Static CR.
RSVP LSP Type

Type of the RSVP LSP:

  • Primary.
  • Hot-Standby.
  • - (No type is specified).
Resv Style

Resources reservation style:

  • SE: shared explicit style, allowing CR-LSPs passing through one link to share a resource reservation.
  • FF: fixed filter style, allowing CR-LSPs passing through one link to use different resource reservations.
IncludeAnyAff

Valid affinity property mask, with the default value of 0x0.
ExcludeAnyAff

Invalid affinity property, with the default value of 0x0.
IncludeAllAff

Valid affinity property with the default value of 0x0.
ER-Hop Table Index

Index of an explicit routing table.
AR-Hop Table Index

Index of an actual explicit routing table.
C-Hop Table Index

Index of a routing table in which CSPF calculates entries.
PSB Handle

PSB handle.
Created Time

Creation time of an MPLS TE tunnel.
Bandwidth Reserved Flag

Bandwidth reservation flag:

  • Unreserved: No bandwidth is reserved for CTs.
  • Reserved: Bandwidth is reserved for one or multiple CTs.
CT0 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT0, in Kbit/sec.
CT0 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT0.
CT1 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT1, in Kbit/sec.
CT1 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT1.
CT2 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT2, in Kbit/sec.
CT2 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT2.
CT3 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT3, in Kbit/sec.
CT3 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT3.
CT4 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT4, in Kbit/sec.
CT4 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT4.
CT5 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT5, in Kbit/sec.
CT5 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT5.
CT6 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT6, in Kbit/sec.
CT6 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT6.
CT7 Bandwidth(Kbit/sec)

Values of bandwidth reserved for CT7, in Kbit/sec.
CT7 Unbound Bandwidth

Bandwidth that is reservable but not reserved for CT7.
Setup-Priority

Setup priority value.
Hold-Priority

Holding priority value.
Primary LSP Info

Information about the primary CR-LSP.
Bypass In Use

Bypass tunnel status:

  • Not Exists: The primary tunnel is not bound to a bypass tunnel.
  • In Use: A bypass tunnel takes over traffic.
  • Exists Not Use: The primary tunnel is bound to the bypass tunnel.
Bypass Tunnel Id

Tunnel ID of a bypass tunnel.
Bypass LSP ID

LSP ID of a bypass tunnel.
Bypass Attribute

Bypass tunnel attribute value or "(Not configured)" indicating that no bypass tunnel attribute is configured and the bypass tunnel inherits attributes of the primary tunnel.
Bypass Unbound Bandwidth Info

Information about the bandwidth of a bypass tunnel that is not bound to a primary tunnel.
BypassTunnel

Name of a bypass tunnel.
FrrNextHop

Next hop of a redirect route.
ReferAutoBypassHandle

Handle of an automatic bypass tunnel.
FrrPrevTunnelTableIndex

Index value of the previous FRR tunnel entry.
Setup Priority

Setup priority value of a bypass tunnel.
Setup Priority

Setup priority value of a Detour LSP.
Hold Priority

Holding priority value of a bypass tunnel.
Hold Priority

Holding priority value of a Detour LSP.
HopLimit

Maximum number of hops along a bypass tunnel.
HopLimit

Maximum number of hops along a Detour LSP.
IncludeAnyGroup

Valid affinity property mask of a bypass tunnel.
IncludeAnyGroup

Valid affinity property mask of a Detour LSP.
ExcludeAnyGroup

Invalid affinity property of a bypass tunnel.
ExcludeAnyGroup

Invalid affinity property of a Detour LSP.
IncludeAllGroup

Valid affinity property of a bypass tunnel.
IncludeAllGroup

Valid affinity property of a Detour LSP.
NextSessionTunnelIndex

Previous index of a bypass tunnel entry.
NextLspId

Next bypass LSP ID.
PrevLspId

Previous bypass LSP ID.
Detour Attribute

Information about attributes of Detour LSPs.
Detour PLR ID

IP address of outbound interface on PLR of a Detour LSP.
Detour Avoid Node

IP address of link peer or LSR ID of node protected by a Detour LSP.
Detour In-Interface

Inbound interface name of a Detour LSP on the local node.
Detour Out-Interface

Outbound interface name of a Detour LSP on the local node.
DetourPHop

Previous hop of a Detour LSP.
DetourNextHop

Next hop of a Detour LSP.
Destination

Destination IP address.
In/OutLabel

Values of the incoming label and outgoing label.
R

Role of a node on an LSP:

  • I: ingress node.
  • T: transit node.
  • E: egress node.
Tunnel-name

Name of a tunnel interface.
LSP-Id

LSP ID.
PrevTunnelIndexInSession

Index of the previous tunnel entry in the same tunnel.
NextTunnelIndexInSession

Index of the next tunnel entry in the same tunnel.
FrrNextTunnelTableIndex

Index value of the next FRR tunnel entry.
PrevSessionTunnelIndex

Next index of a bypass tunnel entry.
Parent Topic: MPLS TE Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >