display lns-group

Function

The display lns-group command displays the LNS backup groups in the system.

This command is supported only on the NetEngine 8000 F1A.

Format

display lns-group { all | name lns-group }

Parameters

Parameter	Description	Value
all	Displays information about all LNS backup groups.	-
name lns-group	Specifies the name of an LNS group.	The value is a string of 1 to 30 characters.

Parameter

Description

Value

all

Displays information about all LNS backup groups.

name lns-group

Specifies the name of an LNS group.

The value is a string of 1 to 30 characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2tp	read

Usage Guidelines

The display lns-group command displays the interface and tunnel board that are bound to the LNS group.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the LNS backup group named test.

<HUAWEI> display lns-group name test
Description : this is lns-group description
 Slot        : 1
 Interface   : LoopBack1
 Interface   : LoopBack12
 Interface   : LoopBack13
 MasterSlot  : 1
 TunnelNum
   Slot 1     : 4

# Display all the LNS backup groups.

<HUAWEI> display lns-group all
------------------------------------------------------
GroupNum GroupName     Interface              AllSlot
0           lns1         Loopback0             ----
1           test         Loopback1              2
----------------------------------------------------

**Table 1** Description of the **display lns-group** command output
Item	Description
Description	description.
Slot	ID of a specified board on the slot that is bound to the LNS group.
Slot 1	Number of tunnels on the slot 1.
Interface	Interface bound to the LNS group.
TunnelNum	Number of tunnels on each tunnel board. This field is displayed if the tunnel load-balance by-tunnel command has been run. SessionNum is displayed instead of TunnelNum if the tunnel load-balance by-session command has been run, indicating the number of sessions on each tunnel board. Neither field is displayed if the tunnel load-balance by-tunnel and tunnel load-balance by-session commands are not run.
GroupNum	Sequence number of the LNS group.
GroupName	Name of the LNS group.
Allslot	IDs of all boards on the slot that is bound to the LNS group.
Masterslot	Slot ID of the tunnel board selected. If the tunnel load-balance by-tunnel and tunnel load-balance by-session commands are not run, this field is not displayed.