display configuration replace file

Function

The display configuration replace file command displays the differences between the replacement configuration and the target configuration.

Format

display configuration replace file

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
cli	debug

Usage Guidelines

Usage Scenario

After configurations are replaced, run the display configuration replace file command to check the differences between the replacement configuration and the target configuration.

Precautions

This command displays only the latest configuration difference file.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display commands that fail to be replaced.

<HUAWEI> system-view
[~HUAWEI] display configuration replace file
#
+ interface Tunnel1
  #
+ interface Tunnel2
  #
+ interface a
  #
- interface b

**Table 1** Description of the **display configuration replace file** command output
Item	Description
+	New configuration. For each modified configuration, both "-" indicating the deleted configuration and "+" indicating the created configuration are displayed.
-	Deleted configuration. For each modified configuration, both "-" indicating the deleted configuration and "+" indicating the created configuration are displayed.