display configuration rollback changes load-result

Format

display configuration rollback changes load-result

Parameters

None

Views

All views except the user view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
config	read

Usage Guidelines

During the configuration rollback operation, some configurations may fail to be retrieved, and some configurations trigger the generation of prompt messages. You can run the display configuration rollback changes load-result command to view the command that fails to be executed and the failure cause.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the latest command that fails to be executed for configuration rollback and the failure cause.

<HUAWEI> display configuration rollback changes load-result
!warning information
+ undo user-security-policy enable 
Warning: The current operation may reduce the degree of account security. It is strongly recommended to keep this enabled.
!Error command 
- interface Tunnel0

**Table 1** Description of the **display configuration rollback changes load-result** command output
Item	Description
!warning information	Message that is generated during the configuration rollback.
+	Added configuration. For each modified configuration, both "-" indicating the deleted configuration and "+" indicating the created configuration are displayed.
!Error command	Command that fails to be executed for configuration rollback.
-	Deleted configuration. For each modified configuration, both "-" indicating the deleted configuration and "+" indicating the created configuration are displayed.