display ipfpm mcp

Function

The display ipfpm mcp command displays measurement control point (MCP) configurations.

Format

display ipfpm mcp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ipfpm	read

Usage Guidelines

Usage Scenario

To check whether MCP configurations are correct, run the display ipfpm mcp command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display MCP configurations.

<HUAWEI> display ipfpm mcp
Specification Information:
 Max Instance Number                       :64
 Max DCP Number Per Instance               :256
 Max ACH Number Per Instance               :16
 Max TLP Number Per ACH                    :16
 Max TLP Number managed by MCP             :4350
 Max ACH Number managed by MCP             :400

Configuration Information:
 MCP ID                                    :1.1.1.1
 Status                                    :Active
 Protocol Port                             :2048
 Current Instance Number                   :1

**Table 1** Description of the **display ipfpm mcp** command output
Item	Description
Specification Information	Specifications for the MCP.
Max Instance Number	Maximum number of IP FPM instances supported by the MCP.
Max DCP Number Per Instance	Maximum number of DCPs supported by each IP FPM instance on the MCP.
Max ACH Number Per Instance	Maximum number of ACHs supported by each IP FPM instance on the MCP.
Max TLP Number Per ACH	Maximum number of TLPs supported by each ACH on the MCP.
Max TLP Number managed by MCP	Maximum number of instance-specific TLPs corresponding to DCPs that can be managed by the MCP. For a statistical instance of which the statistical period is 1s, the number of used instance-specific ACHs is 10 times the actual number of instance-specific ACHs. For a statistical instance of which the statistical period is 10s or longer, the number of used instance-specific ACHs is the same as the actual number of instance-specific ACHs.
Max ACH Number managed by MCP	Maximum number of ACHs that can be queried in real time. For a statistical instance of which the statistical period is 1s, the number of queried ACHs is 10 times the actual number of queried ACHs. For a statistical instance of which the statistical period is 10s or longer, the number of queried ACHs is the same as the actual number of queried ACHs.
MCP ID	Measurement control point ID.
Configuration Information	MCP configurations.
Status	MCP status: Active. Deleting.
Protocol Port	UDP port number used for the MCP to communicate with DCPs.
Current Instance Number	Number of IP FPM instances.