display dcn default-port

Function

The display dcn default-port command displays information about interfaces on which the DCN feature is enabled by default.

Format

display dcn default-port

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dcn	read

Usage Guidelines

Usage Scenario

Whether the DCN feature is enabled by default on an interface depends on the type of the subcard on which the interface resides and the number of interfaces on the subcard. To view the interfaces on which the DCN feature is enabled by default, run the display dcn default-port command.

Prerequisites

The DCN feature has been enabled globally using the dcn command in the system view.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about interfaces on which the DCN feature is enabled by default.

<HUAWEI> display dcn default-port
There are total 3 physical port(s) support DCN in chassis.
DCN default-port:
--------------------------------------------------------------------------
board        card        def-port
--------------------------------------------------------------------------
Slot 1      Card 1      port 0,16
            Card 5      channel 1 ,17 ,33 ,49 on port 0
--------------------------------------------------------------------------
                            End of Information.
--------------------------------------------------------------------------

**Table 1** Description of the **display dcn default-port** command output
Item	Description
board	Board slot number of the interface on which the DCN feature is enabled by default.
card	Subcard number of the interface on which the DCN feature is enabled by default.
def-port	Name of an interface on which the DCN feature is enabled by default.