display dcn element-info

Function

The display dcn element-info command displays details about all NEs that use sub-interfaces 4094 for DCN communication.

This command varies in transport and router modes. For detailed differences, see Differences Between Commands in Transport and Router Modes. This topic describes the command configuration in router mode.

Format

display dcn element-info

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dcn	read

Usage Guidelines

Usage Scenario

To view details about all NEs that use sub-interfaces 4094 for DCN communication, run the display dcn element-info command.This·command·can·be·used·to·query·NE·information·only·when·DCN·communication·through·sub-interface·4094·is·enabled.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about NEs on the DCN.

<HUAWEI> display dcn element-info
Network Element Info 
NEID            NEIP            MAC ADDRESS    DEVICETYPE  COMPANY   NEIPv6 
0.2.34.34       10.0.0.2        --             --          --        -- 
0.3.51.51       10.0.0.30       00e0-fc12-3456 CX          HUAWEI    :: 
Total Number: 2

**Table 1** Description of the **display dcn element-info** command output
Item	Description
Network Element Info	NE information.
NEID	NE ID.
NEIP	IPv4 address of an NE.
MAC ADDRESS	MAC address of an NE.
DEVICETYPE	NE type.
COMPANY	NE manufacturer.
NEIPv6	IPv6 address of an NE.
Total Number	Number of NEs.