display mpls l2vpn oam-mapping

Function

The display mpls l2vpn oam-mapping command displays BGP VPWS OAM mapping information.

Format

display mpls l2vpn oam-mapping

display mpls l2vpn oam-mapping interface { interface-name | interface-type interface-number }

Parameters

Parameter	Description	Value
interface interface-type interface-number	Specifies an AC interface.	-

Parameter

Description

Value

interface interface-type interface-number

Specifies an AC interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2vpn	read

Usage Guidelines

Usage Scenario

In a BGP VPWS scenario, after the mpls l2vpn oam-mapping command is run on a PE, a mapping between PW OAM status and AC OAM status is automatically created. To check OAM mapping information, run the display mpls l2vpn oam-mapping command.

Precautions

If PW OAM or AC OAM has not been configured when the display mpls l2vpn oam-mapping command is run, no information will be displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display OAM mapping information on GE 0/1/0.1.

<HUAWEI> display mpls l2vpn oam-mapping interface gigabitethernet 0/1/0.1
AC OAM Info:
  EOAM Type      : 802.1ag
  MaIndex        : 0x2
  AC OAM State   : Up
  OAM-mapping    : Enable
 PSN info:
  Local CE-ID    : 2
  Remote CE-ID   : 6
  VC status      : Primary
  Link State     : Up
  Active State   : Active
  BFD for PW     : Enable
  BFDSessionIndex:--,    BFD State:    invalid State
  BFD for LSP    : --    TunnelNum: --    PSN State : --
  Local CE-ID    : 2
  Remote CE-ID   : 10
  VC status      : Secondary
  Link State     : Up
  Active State   : Inactive
  BFD for PW     : Enable
  BFDSessionIndex:--,   BFD State :    invalid State
  BFD for LSP    : --    TunnelNum: --    PSN State : --

# Display all OAM mapping information of BGP VPWS.

<HUAWEI> display mpls l2vpn oam-mapping
Interface             Active CE-ID/RMT  VC-status AC-OAM  BFD-for-PW
 GigabitEthernet0/1/0   YES    1/2        Main       Enable    Enable
 GigabitEthernet0/1/0   NO     1/3        Secondary  Enable    Enable

**Table 1** Description of the **display mpls l2vpn oam-mapping** command output
Item	Description
AC OAM Info	AC OAM information.
AC OAM State	Local AC fault detection status: Up: AC fault detection is not enabled, or AC fault detection is enabled but no AC fault is detected. Down: AC fault detection is enabled, and an AC fault is detected.
EOAM Type	Ethernet OAM type: 802.1ag: CFM detection. 802.3ah: EFM detection.
MaIndex	MA index.
OAM-mapping	OAM mapping status on the local PE: Enable: OAM mapping is enabled on the local PE. Disable: OAM mapping is disabled on the local PE.
PSN info	PSN information.
PSN State	If BFD for LSP is not configured, a tunnel is Up by default. If a PW uses a tunnel that does not have the BFD for LSP configuration, PSN State is also Up.
Local CE-ID	Local CE ID.
Remote CE-ID	Remote CE ID.
VC status	Whether a PW is a primary PW: primary. secondary.
Link State	Link status of the AC interface: Up. Down.
Active	Whether a PW is active: YES. NO. This flag holds significance only when both the primary and secondary PWs exist.
Active State	Whether a PW is active: Active. InActive. This flag holds significance only when both the primary and secondary PWs exist.
BFD for PW	Whether BFD for PW is enabled on the local PE.
BFD State	BFD session status: Up: The BFD session is Up. Down: The BFD session is Down. Admin down: The BFD session is administratively Down. This field is displayed only when BFD for PW is enabled.
BFD for LSP	BFD for LSP configuration. 0 indicates BFD for LSP is not configured.
invalid State	Invalid BFD session state.
Interface	Type and number of the AC interface.
CE-ID/RMT	Local CE ID/remote CE ID.
VC-status	Whether a PW is a primary PW: Main: primary PW. Secondary: secondary PW.
AC-OAM	Whether the local PE can report an AC fault to the remote PE using OAM: Enable: The local PE can report an AC fault to the remote PE using OAM. Disable: The local PE cannot report an AC fault to the remote PE using OAM.
BFD-for-PW	Whether BFD for PW is enabled on the local PE: Enable. Disable.
BFDSessionIndex	Automatically generated BFD session index.
TunnelNum	Number of tunnels detected by BFD.