display mpls te srlg

Function

The display mpls te srlg command displays information about shared risk link group (SRLG) configurations and interfaces that join an SRLG.

Format

display mpls te srlg srlg-number

display mpls te srlg all

Parameters

Parameter	Description	Value
srlg-number	The SRLG group number to which the interface belongs.	The value is an integer that ranges from 0 to 4294967295.
all	Display all SRLG group on the interface.	-

Parameter

Description

Value

srlg-number

The SRLG group number to which the interface belongs.

The value is an integer that ranges from 0 to 4294967295.

all

Display all SRLG group on the interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

After configuring SRLGs on an interface, run the display mpls te srlg command to check the configurations. The display mpls te srlg command displays the following information:

Maximum number of SRLGs supported on a node
Number of SRLGs that have been configured on the node
Member interfaces in SRLGs
After configuring SRLGs in the interface view, run the display mpls te link-administration srlg-information command to check the configuration.

Example

The actual command output varies according to the device. The command output here is only an example.

# View the SLRG information on the node.

<HUAWEI> display mpls te srlg all
Total SRLG supported : 1024
Total SRLG configured : 2
 SRLG         123:          GE0/1/0
 SRLG         234:          GE0/1/0

**Table 1** Description of the **display mpls te srlg** command output
Item	Description
Total SRLG supported	The maximum number of SRLGs a node can support.
Total SRLG configured	Number of SRLGs configured on the node.
SRLG	The interface included in the SRLG group.